Dynamometer Specifications
Enclosure:Designed to NEMA4X/IP55. Suitable for continuous outdoor use.
Accuracy: 0.1% of capacity.*
Repeatability: 0.1% of capacity.
1 part in 1000 display mode with Dillon provided shackles.
Body Protection: Aluminum capacities are anodized. Alloy steel capacities are electroless-nickel plated.
Bearings: Unmatched repeatability attained by needle bearings in shackle pin holes up to EDx-10K. Shackle pin acts as inner race.
Shackles: Forged industry standard anchor shackles. Models up to EDx-10K use precision machined shackle pin. Higher capacities use forged pin.
Display: 128 x 64 dot-graphic LCD display shows up to 6 digits 1.0“ (26 mm) high plus annunciators and softkeys. Digits are .11 inches (7mm) thick for unmatched readability.
Display update rate: 2 times per second.
Connector: Recessed sealed connector may be used for serial communications or connection to a Communicator remote.
RS-232 / RS-485 communication: Print or extract data easily. Continuous output can drive a scoreboard. Configurable poll character.
Calibration: Traceable to the National Institute of Standards and Technology. Certificate included with curve of readings. Passes only with three consecutive confirming runs, with all points in specification.
Battery life: 320 hours typical use with two C-cell alkaline batteries. 40 hours typical with Radio Link system.
Operating temperature: -4° F to 140° F (-20° to 60° C) Included with instrument: Carry case, batteries, manual and certificate of calibration. EDx-50K and EDx-100K with shackles include shackle crate and spacers.
Options: Shackles. 2.4 GHz radio board. Display backlight.
|