Go to >> Crane Scales Main     EDxtreme Crane Scale Features
PDF Downloads:
Specifications     Brochure

EDxtreme Crane Scale Specifications

Ap Mechanical Crane Photo

Enclosure: Designed to NEMA4X/IP55. Suitable for continuous outdoor use.

Accuracy: 0.1% of capacity.*

Repeatability: 0.1% of capacity.*
* Normal resolution mode.

Ultimate overload: See table above

Safe overload: 200% of capacity Body protection: Aluminum capacities are anodized. Alloy steel capacities are electroless-nickel plated.

Bearings: Unmatched repeatability attained by needle bearings in shackle pin holes up to EDx-10K. Precision machined shackles act as inner race.

Shackles: Forged industry standard anchor shackle bows, galvanized finish. Models up to EDx-10K use precision machined shackle pin. Higher capacities use forged pin.

Display: 128 x 64 dot-graphic LCD display shows up to 6 digits 1.0 (26 mm) high plus annunciators and softkeys. Digits are .11 inches (7mm) thick for unmatched readability.

Display update rate: 2 times per second.

Connector: Recessed sealed connector may be used for direct serial communications or connection to a Communicator remote.

RS-232 / RS-485 communication: Print or extract data easily. Continuous output can drive a scoreboard. Configurable poll character.

Calibration: Traceable to the National Institute of Standards and Technology. Certificate included with curve of readings. Passes only with three consecutive confirming runs, with all points in specification.

Battery life: 320 hours typical use with two C-cell alkaline batteries. 40 hours typical with Radio Link system.

Operating temperature: -4 F to 140 F (-20 to 60 C)

Included with instrument: Shipping/storage crate(s), batteries, manual and certificate of calibration.

Options: 2.4 GHz radio board. Display backlight.

EDxtreme Capacity x Resolution
Unit Capacity lb. (kg) Capacity x Resolution
Ultimate Overload Protection Body Construction
2,500 (1000) 2500 lb x 2/0.5
1000 kg x 1/0.2
10000 N x 10/2
700 % 2024 Aircraft Aluminum
5,000 (2000) 5000 lb x 5/1
2000 kg x 2/0.5
20000 N x 20/5
700 % 2024 Aircraft Aluminum
10,000 (5000) 10000 lb x 10/2
5000 kg x 5/1
50000 N x 50/10
700 % 2024 Aircraft Aluminum
25,000 (10000) 25000 lb x 20/5
10000 kg x 10/2
100000 N x 100/20
500 % E4340 Aircraft Alloy Steel
50,000 (20000) 50000 lb x 50/10
20000 kg x 20/5
200000 N x 200/50
500 % E4340 Aircraft Alloy Steel

Communicator Specifications

Enclosure: Designed to NEMA 3 / IP44 with optional sleeve. Suitable for protected outdoor use.

Instrument size: 9.0 x 4.6 x 1.8 inch (228 x 117 x 45mm).

Accuracy: Not applicable. Only sends and receives digital information.

Display: 128 x 64 dot-graphic LCD display can show full readings up to 5 instruments.

Battery life: 40 hours radio or 45 wireline using four AA alkaline batteries under typical use.

Operating temperature: -4 F to 140 F (-20 to 60 C)

Connectors: Sealed connectors may be used for serial communications and wired connection to an EDxtreme crane scale.

RS-232 communication: Print or extract data easily. Continuous output can drive a scoreboard. Configurable poll character.

Included with remote: Carry case and batteries.

Accessories: Rubberized case protector sleeve. Remote wall mount bracket. Serial and remote cable assemblies.

Update rate from scale: 2 times per second.


Radio Specifications

FCC Certified: For unlicensed low power devices. No radio licensing or permits required for normal operation.* (In the US and Canada. Check local ordinances in other countries.)

Frequency: 2.4 GHz spread-spectrum operates between 2.402 2.478 GHz. Continuously and automatically changes frequencies many times per second for consistent, reliable communications.

Output level: 10 mW (20 dBm)

Display update rate: 2 times per second with single dynamometer. Multiinstrument networks result in reduced updates.

Number of networks: 63 remotes can operate independently in the same airspace with unique channels.

Number of links remote can control: Up to 15 addresses are available per network channel.

Configuration: Address and Network channels are front-panel configurable.

Antenna: Integral antenna. Range Open-air Up to 300 feet, line-of-sight. Indoors Dependent upon installation site with 150 feet common.

Approval: FCC ID: KQL-PKLR2400. CAN ID: CAN2268391158A


Fredrick-Shelton & Associates, Inc.
Dynamometers, Crane Scales and Force Measurement equipment
Sales & Service
Address: 1311 Lake Washington Drive
Lawrenceville, GA 30043
Mobile: (770) 265-9587 Tel/Fax: (770) 995-5205

©2006 Fredrick-Shelton & Associates, Inc.